PAS3225P3R3113 [TAIYO YUDEN]
CERAMIC TYPE POLYACENE CAPACITORS; 陶瓷类苯类电容器型号: | PAS3225P3R3113 |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | CERAMIC TYPE POLYACENE CAPACITORS |
文件: | 总8页 (文件大小:479K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
CERAMIC TYPE POLYACENE CAPACITORS
REFLOW
■ FEATURES
◦ꢁHigh capacity / High reliability
◦Rꢁ oHS / WEEE compliance
Polyacene Capacitors can store a large number of ions into its amor-
phous structure (doping), therefore Polyacene Capacitors has much
larger capacitance than conventional electric double layer capacitor.
In addition, Polyacene Capacitors is extremely stable material and
Polyacene Capacitors shows excellent performance in cycle life and
durability to overcharge and overdischarge.
Polyacene Capacitors are RoHS and WEEE compliant products and
have no recycling and collection duty that is required in lithium ion
battery’s case.
◦Rꢁ eflowable with lead-free condition
(Refer to Reliability Data for recommendable reflow pattern)
■ APPLICATIONS
◦ꢁMemory and RTC back-up power source used for cellular phone, PDA, digital camera, portable radio and so on.
■ ORDERING CODE
P A S 3 2 2 5 P △ 2 R 6 1 4 3
❶
❷
❸
❹
❺
❶Series name
❷Dimention (mm)
❹Voltage
❸Shape
❺Nominal Capacitance
PAS Polyacene Capacitors
3225
3.2×2.5
2R6
2.6V
P△
Chip Type
143
0.014F
△=Blank space
3R3
3.3V
113
0.011F
*R=Decimal point
■ EXTERNAL DIMENSIONS
Terminal height
(0.28)
(
)
Polarity marking(: +)
Welding
Lot number marking :
(Year/Month/Consecutive numbers)
2.9
Cell top area:(-)minus
Unit:mm
3.2±0.15
1.0±0.15
1.0±0.15
■ PART NUMBERS
Maximum Usable
Voltage[V]
Typical Internal
Part Number
Lead Free Reflowable
RoHS
Norminal Capacity[μAh] Norminal Capacitance[F]
Resistanc
80
[e Ω]
PAS3225P 2R6143
PAS3225P 3R3113
○
○
○
○
2.6
5.0※1
4.0※2
0.014
0.011
3.3
200
※1 Capacity is measured from maximum usable voltage to 2.0Vꢀ※2 Capacity is measured from maximum usable voltage to 2.0V
■ SPECIFICATIONS
Part Number
1.Operating Temp.Range
2.Max.Usable Voltage(V)
3.Initial Capacitance(F)
4.Initial Capacity(μAh)
5.Initial Internal Resistance(Ω)
6.Max.Discharge Curren(t μA)
Highest
PAS3225P 2R6143
-30~+70℃
2.6V
PAS3225P 3R3113
-20~+70℃
3.3V
Over 0.0105
Over 3.5
Over 0.007
Over 3.2
Under 300
10
Under 700
10
Over 60% of Initial Spec
Over 70% of Initial Spec
Over 60% of Initial Spec
Over 60% of Initial Spec
temperature
7.Temperature
Charcteristics
Lowest
temperature
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
135
■ RELIABILITY DATA
Items
Specifications
PAS3225P 2R6143
Test Conditions, Remark
PAS3225P 3R3113
-20℃~+70℃
3.3V
1. Operating Temperature range
2. Max. Usable Voltage
-30℃~+70℃
2.6V
Conduct reflow soldering twice according to the reflow soldering test condition
mentioned below.
(Conduct the reflow in the condition of the voltage of 0.3V or lower.)
3. Resistance to Reflow
Soldering Heat
Capacity/Capacitance : Within initial spec.
Appearance : No noticeable abnormality
Apply a max.usage voltage to the capacitor for 500 hours at max. operating
temp. and measure the floating charge characteristics after returning to normal
temperature and humidity.
Capacity/Capacitance : Over 70% of initial spec.
Appearance : No noticeable abnormality
4. Floating Charge Characteristics
Measure the charge/discharge cycle characteristics after the 10000 cycles of
charge/discharge at 25±5 ℃ with the charge/discharge cycle test condition for
each part.
5. Charge/Discharge
Cycle Characteristics
Capacity/Capacitance : Over 80% of initial spec.
Appearance : No noticeable abnormality
Capacity/Capacitance : Over 80% of initial spec.
Appearance : No noticeable abnormality
Leave the capacitor in an atmosphere of 85℃±2℃ and -30±2℃ consecutively
6. Thermal Durability
7. Humidity Durability
8. Vibration Durability
for 96 hours each, and return to normal temperature and humidity.
Capacity/Capacitance : Over 80% of initial spec.
Appearance : No noticeable abnormality
Temperature : 40±2℃, Humidity : 90~95%RH Leave the capacitor for under the
condition for 96hours then return to normal temperature and humidity.
No exterior abnormality observed :
initial spec. values retained
Apply a sine wave vibration of 1.5mm amplitude at frequency 10~55Hz, for 2hours
per each direction (X,Y and Z) , for 6 hours in total.
◦ꢁReflow Soldering Test Condition
Reflow profile with lead free condition
◦ꢁCharge/Discharge Cycle Test Condition
PAS3225P 2R6143 PAS3225P 3R3113
Charging/Discharging
260
300
300
Resistance (Ω)
Charging Voltage (V)
2.6
4.5
0.5
3.3
4.5
0.5
Charging Time (min.)
Discharging Time (min.)
Cautions : Do not charge prior to reflow,
Set reflow condition within the range provided in "Specifications", which will
be published separately.
Consult with us about the details.
(
)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
136
CERAMIC TYPE PAS CAPACITOR
■PACKAGING
① Packaging Specifications
Item
Quantity per Reel
10000
Tape Width
8.0±0.3
Pitch
Reel Diameter
φ330±2
φ330±2
Unit:mm
PAS3225P 2R6143
PAS3225P 3R3113
4.0±0.1
4.0±0.1
10000
8.0±0.3
② Taping Dimensions
●Emboss Shape
③ Leader Section/Trailer Section
Leader section :Over 400mm(Containing at least 88 vacant pockets of carrier tape sealed with top cover tape)
Trailer section :Over 40mm(Over 10 vacant pockets of carrier tape sealed with top cover tape)
④ Reel Size
⑤ Peel Strength
0.1~0.7N under the condition of the figure below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_ceramic_pack_e-01
CERAMIC TYPE PAS CAPACITOR
■RELIABILITY DATA
1. Operating Temperature range
PAS3225P 2R6143
Specified Value
-30℃~+70℃
-20℃~+70℃
PAS3225P 3R3113
2. Max. Usable Voltage
PAS3225P 2R6143
Specified Value
PAS3225P 3R3113
2.6V
3.3V
3. Resistance to Reflow Soldering Heat
PAS3225P 2R6143
Specified Value
PAS3225P 3R3113
Capacity/Capacitance
Appearance
: Within initial spec.
: No noticeable abnormality
Conduct reflow soldering twice according to the reflow soldering test condition mentioned below.
(Conduct the reflow in the condition of the voltage of 0.3V or lower.)
Reflow Soldering Test Condition
Reflow profile with lead free condition
Test Methods and
Remarks
Cautions : Do not charge prior to reflow, Set reflow condition within the range provided in "Specifications", which will be published
separately.
Consult with us about the details.
4. Floating Charge Characteristics
PAS3225P 2R6143
PAS3225P 3R3113
Test Methods and Apply a max.usage voltage to the capacitor for 500 hours at max. operating temp. and measure the floating charge characteristics after
Remarks returning to normal temperature and humidity.
Capacity/Capacitance : Over 70% of initial spec.
Appearance : No noticeable abnormality
Specified Value
5. Charge/Discharge Cycle Characteristics
PAS3225P 2R6143
Specified Value
PAS3225P 3R3113
Capacity/Capacitance : Over 50% of initial spec.
Appearance : No noticeable abnormality
Measure the charge/discharge cycle characteristics after the 10000 cycles of charge/discharge at 25±5 ℃ with the charge/discharge
cycle test condition for each part.
Charge/Discharge Cycle Test Condition
Part Number
Charging/Discharging Resistance (Ω)
Charging Voltage (V)
PAS3225P 2R6143
PAS3225P 3R3113
Test Methods and
Remarks
300
2.6
4.5
0.5
300
3.3
4.5
0.5
Charging Time (min.)
Discharging Time (min.)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_ceramic_reli_e-01
6. Thermal Durability
Specified Value
PAS3225P 2R6143
PAS3225P 3R3113
Capacity/Capacitance : Over 80% of initial spec.
Appearance : No noticeable abnormality
Test Methods and Leave the capacitor in an atmosphere of 85℃±2℃ and -30±2℃ consecutively for 96 hours each, and return to normal temperature
Remarks
and humidity.
7. Humidity Durability
Specified Value
PAS3225P 2R6143
PAS3225P 3R3113
Capacity/Capacitance
Appearance
Over 80% of initial spec.
No noticeable abnormality
Test Methods and Temperature : 40±2℃, Humidity : 90~95%RH Leave the capacitor for under the condition for 96hours then return to normal temperature
Remarks
and humidity.
8. Vibration Durability
Specified Value
PAS3225P 2R6143
PAS3225P 3R3113
No exterior abnormality observed :initial spec. values retained
Test Methods and
Remarks
Apply a sine wave vibration of 1.5mm amplitude at frequency 10~55Hz, for 2hours per each direction (X,Y and Z) , for 6 hours in total.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_ceramic_reli_e-01
CERAMIC TYPE PAS CAPACITOR
■PRECAUTIONS
1. Use under the maximum usable voltage
When voltage which exceed the maximum usable voltage is applied, it might cause abnormal current flow, which shorten lifetime, and leakage , and sometimes
damages PAS capacitors.
2. Use under maximum operating temperature
A capacitor using in over max operating temperature may lead to shorter life, leakage, and electrical damage by increasing internal pressure.
3. Limited lifetime
Lifetime of PAS capacitor is greatly affected by surrounding temperature. If the temperature lowered by 10℃, the lifetime will approximately doubled. Design
a circuit under consideration of deterioration of electrical characteristics after long time usage, i.e. decrease in capacitance and increase in internal
resistance.
4. PAS capacitor's electrical characteristics might change depending on the surrounding temperature
PAS Capacitor’s electrical characteristics might change depending on the surrounding temperature aside from aged deterioration.
Therefore, be sure to confirm the temperature performance before use product.
5. PAS capacitor has polarity
PAS capacitor has polarity. Please check the polarity before use.
If a reverse voltage is applied, causing damage to the product.
6. Mind high ripple current or rapid charge / discharge
In circuit with high ripple current or rapid charge / discharge, the lifetime of PAS capacitors might be shortened by self-heating.
7. Mind voltage drop when back-up
When back-up (discharging) starts, voltage will drop because of active current and internal resistance.
8. Series connection
In case of using PAS capacitor in series connection, the voltage of each capacitor is not always equal and it may be occurred excessive voltage in a part of
capacitor, which may lead to shortening lifetime and breakdown. Take a margin against a rated voltage or add a balancing resistance.
9. Don’t contact with wiring pattern during installing
If PAS capacitor contact with wiring pattern, it may causes short-circuit, and if there is wiring pattern underneath of PAS capacitor, short circuit would
occur by damage of resist.
10. Environment of usage
In case PAS capacitor is used in high humidity, alkaline or acid air, it may cause deteriorating of its performance and short circuit by corrosion of outer can
or terminal. In addition, used in sudden temperature change or high humidity, it may cause deteriorating of its performance and electrolyte leak by dew
condensation.
11. Don’t apply shock and vibration or pressure
PAS capacitor is sensitive to shock. Don’t drop PAS capacitor and not apply strong pressure to a body, terminals. Soldering part or terminal might be
damaged if applying vibration, shock and stress such as pinch, tip, push and twist after installed.
12. Soldering
If next each item is not minded, it may cause deteriorating of its performance, leakage, and shortening lifetime.
・Don’t contact solder iron to a cell body.
・Don’t solder over solder conditions in the soldering test condition sheet.
・Don’t charge/discharge before reflow
13. Mind cleaning condition when cleaning circuit-board after soldering
Cleaning may affect PAS capacitor. Consult us about cleaning conditions beforehand.
Some cleaning conditions cause detrimental influence.
14. Storage
Keep following cautions for storage of PAS capacitor.
● Don’t store in high temperature and high humidity condition and a place where receiving direct sunlight. Storing PAS capacitor in the room condition of
10 ºC - 35 ºC and less than 65% relative humidity is recommended.
● Sudden temperature change or high humidity may cause deteriorating of its characteristics and soldering.
● Don’t store PAS capacitor near water, salt water or oil, and dew condensation, gasified oil or salinity filled place.
● Don’t store PAS capacitor in the hazardous gas (hydrogen sulfide, sulfurous, chlorine, ammonia, bromine, methyl bromine and etc.) .
● Don’t fumigate by halogen fumigant.
● Don’t store PAS capacitor near acid or alkaline solvent.
● Don’t store PAS capacitor in a place where exposed to ozone, ultraviolet or x-ray.
● Don’t store PAS capacitor in a place where vibration and shock might occur.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_ceramic_prec_e-01
15. Disposal
Dispose PAS capacitor in accordance with local and country rules and regulations.
16. Usage
This product is developed, designed and intended for use in general electronics equipment (for information service, home electric appliances, audio and visual
equipment, RTC & memory back up for consumer product and institutional use).
Please consult the manufacturer in advance when the capacitor is used in devices such as: medical devices; transportation devices; industrial devices;
aerospace industrial devices; security devices and disaster prevention devices.
17. Other Notice
● Don’t heat or throw PAS capacitor into fire.
● Don’t short circuit.
● Don’t solder directly to a cell body.
● Don’t open a body.
● Don’t deform.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_ceramic_prec_e-01
相关型号:
©2020 ICPDF网 联系我们和版权申明